Time switch aging test equipment

Short Description:

Time control: The device can continuously test and run the time switch according to the set time parameters, simulating a long period of use. Through the actual time control, the stability and reliability of the time switch can be tested under different usage times.

Aging simulation: The equipment can simulate different aging environments and conditions, such as high temperature, low temperature, humidity, vibration, etc., in order to accelerate the aging process of the time-control switch. By simulating the aging environment, potential problems and defects can be found faster, so that repair or replacement can be carried out in advance.

Function test: The equipment can test the various functions of the time control switch, including on/off control, timing function, time delay function and so on. Through accurate testing, it can determine whether the time-control switch is working properly and detect possible faults or problems.

Safety testing: The device can test the safety performance of the time-control switch, including over-current protection, over-voltage protection, short-circuit protection and so on. Through the safety detection, it can ensure that the time control switch will not have any safety hazard or failure during the working process.

Data recording and analysis: The device can record the test data of the time-controlled switch and perform data analysis and statistics. Through data analysis, it can analyze the performance trend of time-controlled switches and predict their service life and reliability.

Alarm and reminder: The device can set alarm parameters so that once an abnormality or failure of the time-control switch is detected, a sound or light alarm will be issued to remind the operator to take care of it.

Send email to us

Photograph

Parameters

Video

Previous: Disconnect switch manual assembly bench

Next: Time controlled switch automatic laser marking equipment

1, equipment input voltage: 380V ± 10%, 50Hz; ± 1Hz;
2, different shell frame products, different models of products can be manually switched or a key to switch or sweep code can be switched; switching between different specifications of products need to be manually replaced/adjusted molds or fixtures.
3, detection test mode: manual clamping, automatic detection.
4, equipment test fixture can be customized according to the product model.
5、Equipment with fault alarm, pressure monitoring and other alarm display functions.
6, Chinese and English version of the two operating systems.
All core parts are imported from Italy, Sweden, Germany, Japan, the United States, China Taiwan and other countries and regions.
8、Equipment can be equipped with optional functions such as “Intelligent Energy Analysis and Energy Saving Management System” and “Intelligent Equipment Service Big Data Cloud Platform”.
9、It has independent independent intellectual property rights.